Nenco External Dome Splice Closure FOSC204A and (FOSC209A)
Features
- Ideal for branch connections for up to 144 (48) fibre terminations.
- Can be mounted on walls, direct buried or on poles with resistance to UV, vibration and have a water tight seal.
- The enclosure is made from moulded plastic and has an IP68/9 rating.
- Excellent temperature range of -40 degrees to +65 degrees for long term reliability.
- The base of the enclosure has 4 (3) round cable entry points and 1 oval cable entry point. Once they have been opened they are sealed using heat shrink tubing.
- The oval port can accept two cables up to 24 (21) mm in diameter or can be used as a loop through cable entry.
- Internal dimensions of the joint allow for safe management of unused tubes without affecting attenuation.
- Individual cable strength retention is available at each cable entry point as standard.
- The splice closure is compliant with IEC standards covering water immersion, UV resistance, salt mist, temperature cycling, fungus resistance, chemical resistance and reentry testing.
- The trays are hinged to allow access to other trays and open past 90 degrees to enable unencumbered work on installed fibres.
- No specialist tools are required to enter the enclosure and it can be locked to prevent unauthorised entry.
Supplied with:
- Sealing ring
- 4 (3) x round heat shrink seals
- 1 x oval heat shrink seal
- 24 x 60mm (40mm) splice protectors
- 1 x 900mm buffer tubing
- 12 x cable ties
- 1 x silver tape for heat protection
- 1 x adhesive tape
- 1 x abrasive tape
- The enclosure is supplied as standard with 1 x 24 (2 x 12) fibre splice tray and can have a further five (two) trays added as required
- Pre-saturated cable cleaning sachet
- Installation instruction
Additional Information
| Product Code: | NNFOSC204A |
|---|