GROMTEC GTAF400 AIR-BLOXX KIT AG-GTAF400-AIRBLOXX

Gromtec GTAF-400 AirBloxx Kit

The Gromtec GTAF-400 Air-BloXX Kit is designed to seal an opening up to 400mm x 400mm. The special Class O Fire rated foam is “kiss cut” into 25mm square sections which allows the material to be easily shaped around cable.

Features

To seal a large square or rectangular floor opening is very simple.

• Raised floor openings are sealed using a UL94 / Class O fire rated foam seal,
• Cables are protected from bare edge floor panel cut outs,
• Air-Foam is supported within the frame and held in place with a friction blade and tape,
• Air-Foam is supported within the frame and held in place with a friction blade and tape,
• By-pass air is eliminated which in turn improves under floor air pressure and provides all the associated financial and performance benefits of a properly sealed raised floor system.
• Measure cut out and cut protective edge trim to the required edge lengths to form a fully protective profile sealing the cut edge of the floor panel cut out.
• Measure & cut Air-Bloxx foam to the required floor opening.
• Shape the material around existing cables, remove square sections as required.
• Install foam seal into the protecive edge trim

Gromtec GTAF-400 Air- BloXX is available in a custom sizes and depths and is suitable for a wide range of air sealing situations – floor openings, perimeter openings, sealing within racks and many more applications.

Dimensions

• Overall: max 410mm x 410mm